Brewery Glycol Chiller - BrewChill Pro 13000SS - 13000 BTUs
The BrewChill Pro 13000SS-2 combines a stainless steel housing with 13,000 BTU/h of cooling capacity for fermentation and tank temperature control. Two 1 HP compressors cool an 18-gallon glycol reservoir that supplies the connected tank circuits.
The standard package includes two pre-installed 80 GPH vane pumps, each powered by a 1/3 HP motor, along with two external digital thermostats and four solenoid valves. These components manage cooling demand in two circuits. Both circuits share the reservoir and total cooling capacity, so the combined load must be considered when selecting the chiller.
Key Features:
- Stainless steel housing: Provides a stainless exterior for installations where this cabinet material is preferred.
- 13,000 BTU/h total cooling capacity: Size the system for the tanks and processes requiring cooling at the same time.
- Two pre-installed vane pumps: Each pump is rated at 80 GPH and has a separate 1/3 HP motor.
- Two 1 HP compressors with R290 refrigerant: Cool the shared glycol supply.
- 18-gallon reservoir: Holds the glycol-and-water mixture circulated through the connected cooling circuits.
- Glycol line distances up to 750 ft: Actual suitability depends on tubing size, insulation, elevation, circuit resistance and cooling demand.
- 208/230 V, 60 Hz power: Supplied with a NEMA 6-20P plug and a 6-ft power cord. Confirm that your installation location has a compatible electrical supply.
Parts Included:
- 1 × Glycol Сhiller with two pre-installed 80 GPH vane pumps, each powered by a 1/3 HP motor
- 2 × External Digital Thermostat
- 4 × Solenoid Valves
BrewChill Pro 13000SS - USA |
|
| MODEL | BC-13000SS-2-ASM |
| MAXIMUM DISTANCE | Up to 750 ft |
| CAPACITY | 13000 BTU/H |
| GLYCOL TANK CAPACITY | 18 gallons |
| COMPRESSOR POWER | 1+1HP |
| RUNNING | With 1 pump - 12.7 AMP With 2 pumps - 15.5 AMP |
| PLUG TYPE (NEMA #) | 6-20P |
| VOLTAGE | 208/230 V |
| FREQUENCY | 60 HZ |
| PUMP TYPE | Vane with 1/3hp motor |
| PUMP | 80 GPH |
| NUMBER OF PRE-INSTALLED PUMPS | 2 |
| NUMBER OF ADDITIONAL PUMPS | 0 |
| REFRIGERANT | R290 |
| REFRIGERANT CHARGE, G (OZ) | 150 (5.29)+150 (5.29) |
| WEIGHT GROSS/NET | 238 / 231 lb |
| POWER CORD LENGTH | 6 ft |
| INLET/OUTLET BARB, IN | red tube 3/4” NPT / blue tube 3/4” NPT |
| OPERATING AMBIENT TEMPERATURE | 60-90 F |
| CLEARANCE AT LEAST | 12" around the entire unit |
| GLYCOL MIXTURE, VOL% | 40 % glycol and 60% water |
Note: Installation of this item must be handled by a qualified installer in order to qualify for product return and/or warranty coverage. Qualified Installer - Defined as a licensed professional who charges a fee for his services, and possesses a business license, contractor's license, and/or resale permit. Common examples of a "qualified installer" include Electrician; General Contractor; Heating and Air Conditioning Specialist.
Tank volume alone does not determine the required cooling capacity. Fermentation temperature control, cold crashing and holding a tank cold place different demands on the chiller.
Use our brewery chiller sizing calculator to estimate your cooling load. Include the number and volume of tanks, ambient temperature, target temperature and required cooling time.
For help selecting a configuration or obtaining a US shipping quote, email sales@beveragecraft.com with your tank details and full delivery address.